Description
An upgrade on the classic NJD SE-1 dub siren...
* All the original sounds
* Variable pitch control
* Variable rate control
* Sustain/length controls
* Raw metal case
* 1/4" mono jack output
* 9v DC power
In addition to the classic fixed NJD controls there are variable pitch and rate controls which really widen the possible sounds.
There are also 3-position switches for controlling the sustain and length. Sustain refers to the siren 'build-up' time when in modes 1 & 4 with the rate off. Length refers to individual modulation length. These two subtle mods expand the noise range further still.
Powered by a standard guitar pedal / Boss PSU (optional). This is the 9 volt DC centre negative type (important!).
Check demo video below (siren plus Dub Delay ANALOG):
Rasta knobs...
Label panel + white/silver knobs...
Black/silver knobs...
* All the original sounds
* Variable pitch control
* Variable rate control
* Sustain/length controls
* Raw metal case
* 1/4" mono jack output
* 9v DC power
In addition to the classic fixed NJD controls there are variable pitch and rate controls which really widen the possible sounds.
There are also 3-position switches for controlling the sustain and length. Sustain refers to the siren 'build-up' time when in modes 1 & 4 with the rate off. Length refers to individual modulation length. These two subtle mods expand the noise range further still.
Powered by a standard guitar pedal / Boss PSU (optional). This is the 9 volt DC centre negative type (important!).
Check demo video below (siren plus Dub Delay ANALOG):
Rasta knobs...
Label panel + white/silver knobs...
Black/silver knobs...
Custom
This product can be customised, for example:
* Case Colour
* Knob Colour / Type
* LED Colour
For more details please get in contact.
* Case Colour
* Knob Colour / Type
* LED Colour
For more details please get in contact.
Size
The metal enclosure measures:
145 mm x 121 mm x 35 mm
(5.72 in x 4.77 in x 1.39 in)
145 mm x 121 mm x 35 mm
(5.72 in x 4.77 in x 1.39 in)
Power supply details

* Output: 9v DC (9 volts)
* Negative Tip / Centre
* Positive Sleeve / Outside
* Negative Tip / Centre
* Positive Sleeve / Outside
It's recommended to use a reputable OG brand (eg Boss, Strymon, Line6 etc), although some of the cheaper alternatives do work ok.






















